06:44:44 INFO Containerlab started version=0.70.2
06:44:44 INFO Parsing & checking topology file=clab.yml
06:44:44 INFO Removing directory path=/work/netlab_cicd/clab-ml_17
06:44:44 INFO Creating docker network name=nl_mgmt_17 IPv4 subnet=192.168.17.0/24 IPv6 subnet="" MTU=0
06:44:44 INFO Creating lab directory path=/work/netlab_cicd/clab-ml_17
06:44:44 INFO Creating container name=dut
06:44:44 INFO Creating container name=pe2
06:44:44 INFO Creating container name=ce1
06:44:44 INFO Creating container name=ce2
06:44:44 INFO Creating container name=p2
06:44:44 INFO Creating container name=p1
06:44:45 INFO Created link: dut:eth1 ▪┄┄▪ p1:eth1
06:44:45 INFO Created link: ce1:eth1 ▪┄┄▪ dut:eth2
06:44:45 INFO Created link: p1:eth2 ▪┄┄▪ p2:eth1
06:44:45 INFO Created link: pe2:eth1 ▪┄┄▪ p2:eth2
06:44:45 INFO Created link: ce2:eth1 ▪┄┄▪ pe2:eth2
06:44:45 INFO Adding host entries path=/etc/hosts
06:44:45 INFO Adding SSH config for nodes path=/etc/ssh/ssh_config.d/clab-ml_17.conf
🎉 A newer containerlab version (0.71.1) is available!
Release notes: https://containerlab.dev/rn/0.71/#0711
Run 'sudo clab version upgrade' or see https://containerlab.dev/install/ for installation options.
[1m╭[0m[1m────────────────[0m[1m┬[0m[1m────────────────────────────────────────────[0m[1m┬[0m[1m────────────────────[0m[1m┬[0m[1m────────────────[0m[1m╮[0m
[1m│[0m[1m      Name      [0m[1m│[0m[1m                 Kind/Image                 [0m[1m│[0m[1m        State       [0m[1m│[0m[1m IPv4/6 Address [0m[1m│[0m
[1m├[0m[1m────────────────[0m[1m┼[0m[1m────────────────────────────────────────────[0m[1m┼[0m[1m────────────────────[0m[1m┼[0m[1m────────────────[0m[1m┤[0m
│ clab-ml_17-ce1 │ linux                                      │ running            │ 192.168.17.101 │
│                │ quay.io/frrouting/frr:10.4.1               │                    │ N/A            │
├────────────────┼────────────────────────────────────────────┼────────────────────┼────────────────┤
│ clab-ml_17-ce2 │ linux                                      │ running            │ 192.168.17.102 │
│                │ quay.io/frrouting/frr:10.4.1               │                    │ N/A            │
├────────────────┼────────────────────────────────────────────┼────────────────────┼────────────────┤
│ clab-ml_17-dut │ juniper_vjunosswitch                       │ running            │ 192.168.17.103 │
│                │ vrnetlab/juniper_vjunos-switch:23.4R2-S2.1 │ (health: starting) │ N/A            │
├────────────────┼────────────────────────────────────────────┼────────────────────┼────────────────┤
│ clab-ml_17-p1  │ linux                                      │ running            │ 192.168.17.105 │
│                │ quay.io/frrouting/frr:10.4.1               │                    │ N/A            │
├────────────────┼────────────────────────────────────────────┼────────────────────┼────────────────┤
│ clab-ml_17-p2  │ linux                                      │ running            │ 192.168.17.106 │
│                │ quay.io/frrouting/frr:10.4.1               │                    │ N/A            │
├────────────────┼────────────────────────────────────────────┼────────────────────┼────────────────┤
│ clab-ml_17-pe2 │ linux                                      │ running            │ 192.168.17.104 │
│                │ quay.io/frrouting/frr:10.4.1               │                    │ N/A            │
╰────────────────┴────────────────────────────────────────────┴────────────────────┴────────────────╯
Using transformed lab topology from snapshot file netlab.snapshot.pickle
Checking virtualization provider installation
OK: clab installed and working correctly
Starting clab nodes
Loading Linux kernel modules mpls-router,mpls-iptunnel required by containers using mpls module
provider clab: executing sudo -E containerlab deploy --reconfigure -t clab.yml

Initial configuration skipped, run 'netlab initial' to configure the devices