Using transformed lab topology from snapshot file netlab.snapshot.pickle Checking virtualization provider installation OK: clab installed and working correctly Starting clab nodes provider clab: executing flock -E 42 /tmp/netlab.lock sudo -E containerlab deploy --reconfigure -t clab.yml 18:55:02 INFO Containerlab started version=0.75.0 18:55:02 INFO Parsing & checking topology file=clab.yml 18:55:02 INFO Removing directory path=/work/netlab_cicd/junos/clab-ml-31 18:55:02 INFO Creating docker network name=nl_mgmt_31 IPv4 subnet=192.168.31.0/24 IPv6 subnet="" MTU=0 18:55:02 INFO Creating lab directory path=/work/netlab_cicd/junos/clab-ml-31 18:55:02 INFO Creating container name=x1 18:55:02 INFO Creating container name=dut 18:55:02 INFO Created link: dut:eth1 ▪┄┄▪ x1:eth1 18:55:03 INFO Executed command node=x1 command="sleep 1" stdout="" 18:55:03 INFO Adding host entries path=/etc/hosts 18:55:03 INFO Adding SSH config for nodes path=/etc/ssh/ssh_config.d/clab-ml-31.conf ╭────────────────┬────────────────────────────────────────────┬────────────────────┬────────────────╮ │ Name │ Kind/Image │ State │ IPv4/6 Address │ ├────────────────┼────────────────────────────────────────────┼────────────────────┼────────────────┤ │ clab-ml-31-dut │ juniper_vjunosrouter │ running │ 192.168.31.101 │ │ │ vrnetlab/juniper_vjunos-router:23.4R2-S2.1 │ (health: starting) │ N/A │ ├────────────────┼────────────────────────────────────────────┼────────────────────┼────────────────┤ │ clab-ml-31-x1 │ linux │ running │ 192.168.31.102 │ │ │ quay.io/frrouting/frr:10.6.1 │ │ N/A │ ╰────────────────┴────────────────────────────────────────────┴────────────────────┴────────────────╯ Deploying initial device configurations Creating Device configuration snippets [CREATED] dut: initial,ospf [CREATED] x1: initial,ospf Checking Are lab devices ready to be configured? [INFO] Checking SSH server(s) on dut [SSH] SSH server on node dut (device vjunos-router) is ready after 79.2 seconds [INFO] Checking lab devices with an Ansible playbook [WARNING]: Found variable using reserved name: hosts PLAY [Wait for SSH servers] **************************************************** PLAY [Wait for device-specific conditions] ************************************* TASK [Set variables that cannot be set with VARS] ****************************** ok: [dut] TASK [Find device readiness script] ******************************************** ok: [dut] TASK [Wait for device to become ready] ***************************************** included: /home/pipi/netlab_gh/netsim/ansible/tasks/readiness-check/junos.yml for dut TASK [set_fact] **************************************************************** ok: [dut] TASK [Wait for first interface (ge-0/0/0)] ************************************* ok: [dut] PLAY RECAP ********************************************************************* dut : ok=5 changed=0 unreachable=0 failed=0 skipped=0 rescued=0 ignored=0 Config Deploying device configurations [INFO] Executing initial configuration for node x1 [INFO] Executing ospf configuration for node x1 [INFO] Starting Ansible playbook to deploy the rest of the configurations [WARNING]: Found variable using reserved name: hosts PLAY [Deploy initial device configuration] ************************************* TASK [Set variables that cannot be set with VARS] ****************************** ok: [dut] TASK [Deploy initial configuration] ******************************************** included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut TASK [Figure out whether to deploy the module initial on current device] ******* ok: [dut] TASK [Find configuration template for initial] ********************************* ok: [dut] TASK [fail] ******************************************************************** skipping: [dut] TASK [Find configuration deployment deploy_script for initial] ***************** ok: [dut] TASK [Print deployed configuration when running in verbose mode] *************** ok: [dut] => { "msg": "initial configuration for dut\n=========================================\nsystem {\n host-name dut;\n static-host-mapping {\n x1 inet 10.0.0.2;\n }\n}\n\ninterfaces {\n ge-0/0/0 {\n mtu 1514;\n }\n\n lo0.0 {\n\n family inet {\n address 10.0.0.1/32;\n }\n }\n ge-0/0/0.0 {\n description \"dut -> x1\";\n\n family inet {\n address 10.1.0.1/30;\n }\n }\n}\nprotocols {\n lldp {\n interface fxp0 {\n disable;\n }\n interface all;\n }\n}\n" } TASK [Deploy initial configuration] ******************************************** included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/junos.yml for dut TASK [junos_config: deploying initial from /work/netlab_cicd/junos/node_files/dut/initial] *** changed: [dut] PLAY [Deploy module-specific configurations] *********************************** TASK [Set variables that cannot be set with VARS] ****************************** ok: [dut] TASK [Deploy individual configuration modules] ********************************* included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut => (item=ospf) TASK [Figure out whether to deploy the module ospf on current device] ********** ok: [dut] TASK [Find configuration template for ospf] ************************************ ok: [dut] TASK [fail] ******************************************************************** skipping: [dut] TASK [Find configuration deployment deploy_script for ospf] ******************** ok: [dut] TASK [Print deployed configuration when running in verbose mode] *************** ok: [dut] => { "msg": "ospf configuration for dut\n=========================================\nrouting-options {\n router-id 10.0.0.1\n}\nprotocols {\n delete: ospf;\n}\n\nprotocols {\n ospf {\n area 0.0.0.0 {\n interface lo0.0 {\n }\n }\n area 0.0.0.0 {\n interface ge-0/0/0.0 {\n interface-type p2p;\n }\n }\n }\n}\n\n" } TASK [Deploy ospf configuration] *********************************************** included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/junos.yml for dut TASK [junos_config: deploying ospf from /work/netlab_cicd/junos/node_files/dut/ospf] *** [WARNING]: statement not found changed: [dut] PLAY [Deploy custom deployment templates] ************************************** skipping: no hosts matched PLAY RECAP ********************************************************************* dut : ok=16 changed=2 unreachable=0 failed=0 skipped=2 rescued=0 ignored=0 Results of configuration script deployments ================================================================================ x1 Script: initial,ospf OK: Lab devices configured This topology tests the "start lab with configuration reload" functionality. You should: * Start the lab with "netlab up" * Save the configuration with "netlab collect -o saved" * Stop the lab with "netlab down" * Restart the lab with "netlab up --snapshot --reload-config saved" * Validate the results with "netlab validate" [WARNING]: Found variable using reserved name: hosts PLAY [Collect device configurations] ******************************************* TASK [Set variables that cannot be set with VARS] ****************************** ok: [dut] TASK [Create '/work/netlab_cicd/junos/saved' directory] ************************ ok: [dut -> localhost] TASK [Find configuration collection script] ************************************ ok: [dut] TASK [Collect device configurations] ******************************************* included: /home/pipi/netlab_gh/netsim/ansible/tasks/fetch-config/junos.yml for dut TASK [Fetch Junos configuration] *********************************************** ok: [dut] TASK [Copy collected configuration to '/work/netlab_cicd/junos/saved' directory] *** changed: [dut -> localhost] PLAY RECAP ********************************************************************* dut : ok=6 changed=1 unreachable=0 failed=0 skipped=0 rescued=0 ignored=0 cwd: /work/netlab_cicd/junos output: saved Checking virtualization provider installation OK: clab installed and working correctly Stopping clab nodes provider clab: executing flock -E 42 /tmp/netlab.lock sudo -E containerlab destroy --cleanup -t clab.yml 18:56:54 INFO Parsing & checking topology file=clab.yml 18:56:54 INFO Parsing & checking topology file=clab.yml 18:56:54 INFO Destroying lab name=ml-31 18:56:54 INFO Removed container name=clab-ml-31-x1 18:56:55 INFO Removed container name=clab-ml-31-dut 18:56:55 INFO Removing host entries path=/etc/hosts 18:56:55 INFO Removing SSH config path=/etc/ssh/ssh_config.d/clab-ml-31.conf