Creating Device configuration snippets
[CREATED] dut: initial,vlan
[CREATED] s2: initial,vlan
[CREATED] s3: initial,vlan
[CREATED] s4: initial,vlan
[CREATED] r1: initial,routing
[CREATED] r2: initial,routing
[CREATED] r3: initial,routing
[CREATED] r4: initial,routing
[CREATED] d1: initial,routing
[CREATED] d2: initial,routing
[CREATED] d3: initial,routing
[CREATED] d4: initial,routing
Config Deploying device configurations
 [INFO] Executing initial configuration for node r1 (namespace clab-
          ml-17-r1)
 [INFO] Executing initial configuration for node r2 (namespace clab-
          ml-17-r2)
 [INFO] Executing initial configuration for node r3 (namespace clab-
          ml-17-r3)
 [INFO] Executing initial configuration for node r4 (namespace clab-
          ml-17-r4)
 [INFO] Executing initial configuration for node d1 (namespace clab-
          ml-17-d1)
 [INFO] Executing initial configuration for node d2 (namespace clab-
          ml-17-d2)
 [INFO] Executing initial configuration for node d3 (namespace clab-
          ml-17-d3)
 [INFO] Executing initial configuration for node d4 (namespace clab-
          ml-17-d4)
 [INFO] Executing routing configuration for node r3 (namespace clab-
          ml-17-r3)
 [INFO] Executing routing configuration for node r2 (namespace clab-
          ml-17-r2)
 [INFO] Executing routing configuration for node r1 (namespace clab-
          ml-17-r1)
 [INFO] Executing routing configuration for node r4 (namespace clab-
          ml-17-r4)
 [INFO] Executing routing configuration for node d4 (namespace clab-
          ml-17-d4)
 [INFO] Executing routing configuration for node d1 (namespace clab-
          ml-17-d1)
 [INFO] Executing routing configuration for node d2 (namespace clab-
          ml-17-d2)
 [INFO] Executing routing configuration for node d3 (namespace clab-
          ml-17-d3)
 [INFO] Starting Ansible playbook to deploy the rest of the
          configurations
[WARNING]: Found variable using reserved name: hosts

PLAY [Deploy initial device configuration] *************************************

TASK [Set variables that cannot be set with VARS] ******************************
ok: [dut]
ok: [s2]
ok: [s3]
ok: [s4]

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut, s2, s3, s4

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [dut]
ok: [s2]
ok: [s3]
ok: [s4]

TASK [Find configuration template for initial] *********************************
ok: [dut]
ok: [s2]
ok: [s3]
ok: [s4]

TASK [fail] ********************************************************************
skipping: [dut]
skipping: [s2]
skipping: [s3]
skipping: [s4]

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [dut]
ok: [s2]
ok: [s3]
ok: [s4]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [dut] => {
    "msg": "initial configuration for dut\n=========================================\n#!/bin/sh\n#\nset -e\nset -x\n\nhostname dut\n#\n# Build hosts file\n#\n#\ncat <<'SCRIPT' >/tmp/hosts\n#\n# Created by netlab initial\n#\n172.31.1.9 d1 eth1.d1\n172.31.1.10 d2 eth1.d2\n172.31.1.11 d3 eth1.d3\n172.31.1.12 d4 eth1.d4\n10.0.0.1 dut\n172.31.1.1 vether1.dut\n172.31.1.5 r1 eth1.r1\n172.31.1.6 r2 eth1.r2\n172.31.1.7 r3 eth1.r3\n172.31.1.8 r4 eth1.r4\n10.0.0.2 s2\n172.31.1.2 vlan1.s2\n10.0.0.3 s3\n172.31.1.3 vlan1.s3\n10.0.0.4 s4\n172.31.1.4 vlan1.s4\nSCRIPT\ngrep \"Created by netlab\" /etc/hosts || uniq /tmp/hosts >>/etc/hosts\n\n#\n# Enable forwarding\n#\nsysctl net.inet.ip.forwarding=1\nsysctl net.inet6.ip6.forwarding=1\necho -n > /etc/rad.conf\n\n#\n# Interface configuration\n#\nifconfig lo0 inet 10.0.0.1/32 alias\nifconfig lo0 up\n\nifconfig vio1 -inet\nifconfig vio1 -inet6\nifconfig vio1 mtu 1500\nifconfig vio1 description \"dut -> s2\"\nifconfig vio1 up\n\n\n#\n# (re-)start RA daemon\n#\npkill -q rad || true\nrad\n"
}
ok: [s2] => {
    "msg": "initial configuration for s2\n=========================================\n#!/bin/bash\n#\nset -e\nset -x\n#\n# Create bash profile script\n#\ncat <<'SCRIPT' >/root/.bash_profile\n#!/bin/bash\n#\nexport PS1=\"\\h(bash)# \"\necho\necho \"Use vtysh to connect to FRR daemon\"\necho\nSCRIPT\n#\n# This is an artifact of unknown provenance that should be removed in a year or two (= 2026/2027)\n#\n# FRR controls these parameters with 'ip forwarding' and 'ipv6 forwarding' commands\n#\nsysctl -w net.ipv4.ip_forward=1\nsysctl -w net.ipv6.conf.all.forwarding=0\n#\ncat <<SCRIPT >.bash_profile\n#!/bin/bash\n#\nexport PS1=\"\\h(bash)$ \"\nexport PATH=$PATH:/usr/sbin\necho \necho \"Use sudo vtysh to connect to FRR daemon\"\necho\nSCRIPT\n#\n# Build hosts file\n#\n#\ncat <<'SCRIPT' >/tmp/hosts\n#\n# Created by netlab initial\n#\n172.31.1.9 d1 eth1.d1\n172.31.1.10 d2 eth1.d2\n172.31.1.11 d3 eth1.d3\n172.31.1.12 d4 eth1.d4\n10.0.0.1 dut\n172.31.1.1 vether1.dut\n172.31.1.5 r1 eth1.r1\n172.31.1.6 r2 eth1.r2\n172.31.1.7 r3 eth1.r3\n172.31.1.8 r4 eth1.r4\n10.0.0.2 s2\n172.31.1.2 vlan1.s2\n10.0.0.3 s3\n172.31.1.3 vlan1.s3\n10.0.0.4 s4\n172.31.1.4 vlan1.s4\nSCRIPT\ngrep \"Created by netlab\" /etc/hosts || uniq /tmp/hosts >>/etc/hosts\n#\n# Configure system defaults on Ubuntu\n#\nhostnamectl set-hostname s2\nPKG_INSTALL=\n#\nif which gpg; then\n  echo \"Package gnupg already installed\"\nelse\n  PKG_INSTALL=\"$PKG_INSTALL gnupg\"\nfi\n#\nif which curl; then\n  echo \"Package curl already installed\"\nelse\n  PKG_INSTALL=\"$PKG_INSTALL curl\"\nfi\n#\nif which bridge; then\n  echo \"Package iproute2 already installed\"\nelse\n  PKG_INSTALL=\"$PKG_INSTALL iproute2\"\nfi\n#\n# PKG_INSTALL always starts with a blank, so we can't just check if it's empty\n# The following hack turns a string that contains only whitespaces into\n# an empty string and removes leading whitespaces\n#\nPKG_INSTALL=`echo $PKG_INSTALL`\nif [ -n \"$PKG_INSTALL\" ]; then\n  echo \"Installing packages $PKG_INSTALL\"\n  if command -v apk >/dev/null; then\n    apk add --no-cache $PKG_INSTALL\n  elif command -v apt-get >/dev/null; then\n    apt-get update -qq && apt-get install -qq $PKG_INSTALL\n  else\n    echo \"Cannot install packages (no supported package manager found)\" >&2\n    exit 1\n  fi\nfi\n#\n# Install FRR on a Ubuntu VM if needed\n#\nif which /usr/lib/frr/frrinit.sh; then\n  echo \"FRR already installed, skipping installation\"\nelse\n  curl -s https://deb.frrouting.org/frr/keys.asc >/etc/apt/trusted.gpg.d/frr.asc\n  FRRVER=\"frr-stable\"\n  echo deb https://deb.frrouting.org/frr $(lsb_release -s -c) $FRRVER > /etc/apt/sources.list.d/frr.list\n  apt-get update -qq && apt-get install -qq frr frr-pythontools bridge-utils ethtool\nfi\n#\n# Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)\n#\n#\n# Enable FRR daemons\n#\n\n/usr/lib/frr/frrinit.sh restart\n\n# Set system defaults\n#\n# Send ARP requests from a sane source IP address\n#\nsysctl -w net.ipv4.conf.all.arp_announce=2\n\n#\n# Create loopbacks, stub and lag/bond devices\n#\nif [ ! -e /sys/class/net/lo ]; then\n  if [ ! -e /sys/devices/virtual/net/lo ]; then\n    ip link add lo type dummy\n    ip link set dev lo up\n  fi\nfi\n\n# Set Linux interface sysctl parameters: Disable IPv6 (for IPv4-only interfaces)\n# or SLAAC (if the device is a router)\n#\nip link set eth1 down\n# Linux interface parameters for eth1\n#\nsysctl -qw net/ipv6/conf/eth1/disable_ipv6=1\nip link set dev eth1 mtu 1500\nip link set eth1 up\n\nip link set eth2 down\n# Linux interface parameters for eth2\n#\nsysctl -qw net/ipv6/conf/eth2/disable_ipv6=1\nip link set dev eth2 mtu 1500\nip link set eth2 up\n\nip link set eth3 down\n# Linux interface parameters for eth3\n#\nsysctl -qw net/ipv6/conf/eth3/disable_ipv6=1\nip link set dev eth3 mtu 1500\nip link set eth3 up\n\n\n#\n# Add vtysh.conf file\necho \"service integrated-vtysh-config\" >/etc/frr/vtysh.conf\n\n#\n# Ensure FRR's log directory exists before enabling file logging\n#\nmkdir -p /var/log/frr && chown frr:frr /var/log/frr\n#\n# Rest of initial configuration done through VTYSH\n#\ncat >/tmp/config <<CONFIG\nhostname s2\n!\nlog file /var/log/frr/frr.log informational\n\n!\nip forwarding\nfrr defaults datacenter\n!\ninterface lo\n no shutdown\n ip address 10.0.0.2/32\n!\ninterface eth1\n no shutdown\n description s2 -> dut\n ! no ip address\n!\ninterface eth2\n no shutdown\n description [Access VLAN red] s2 -> r2\n ! no ip address\n!\ninterface eth3\n no shutdown\n description [Access VLAN vlan_1] s2 -> d2\n ! no ip address\n!\ninterface eth1.700\n no shutdown\n description [SubIf VLAN red] s2 -> dut\n ! no ip address\n!\ninterface eth1.1\n no shutdown\n description [SubIf VLAN vlan_1] s2 -> dut\n ! no ip address\n!\ninterface vlan700\n no shutdown\n description VLAN red (700) -> [r1,dut,r2,r3,s3...]\n ! no ip address\n!\ninterface vlan1\n no shutdown\n description VLAN vlan_1 (1) -> [d1,dut,d2,d3,s3...]\n ip address 172.31.1.2/24\n!\ndo write\nCONFIG\nvtysh -f /tmp/config\n\n!\nexit 0\n"
}
ok: [s3] => {
    "msg": "initial configuration for s3\n=========================================\n#!/bin/bash\n#\nset -e\nset -x\n#\n# Create bash profile script\n#\ncat <<'SCRIPT' >/root/.bash_profile\n#!/bin/bash\n#\nexport PS1=\"\\h(bash)# \"\necho\necho \"Use vtysh to connect to FRR daemon\"\necho\nSCRIPT\n#\n# This is an artifact of unknown provenance that should be removed in a year or two (= 2026/2027)\n#\n# FRR controls these parameters with 'ip forwarding' and 'ipv6 forwarding' commands\n#\nsysctl -w net.ipv4.ip_forward=1\nsysctl -w net.ipv6.conf.all.forwarding=0\n#\ncat <<SCRIPT >.bash_profile\n#!/bin/bash\n#\nexport PS1=\"\\h(bash)$ \"\nexport PATH=$PATH:/usr/sbin\necho \necho \"Use sudo vtysh to connect to FRR daemon\"\necho\nSCRIPT\n#\n# Build hosts file\n#\n#\ncat <<'SCRIPT' >/tmp/hosts\n#\n# Created by netlab initial\n#\n172.31.1.9 d1 eth1.d1\n172.31.1.10 d2 eth1.d2\n172.31.1.11 d3 eth1.d3\n172.31.1.12 d4 eth1.d4\n10.0.0.1 dut\n172.31.1.1 vether1.dut\n172.31.1.5 r1 eth1.r1\n172.31.1.6 r2 eth1.r2\n172.31.1.7 r3 eth1.r3\n172.31.1.8 r4 eth1.r4\n10.0.0.2 s2\n172.31.1.2 vlan1.s2\n10.0.0.3 s3\n172.31.1.3 vlan1.s3\n10.0.0.4 s4\n172.31.1.4 vlan1.s4\nSCRIPT\ngrep \"Created by netlab\" /etc/hosts || uniq /tmp/hosts >>/etc/hosts\n#\n# Configure system defaults on Ubuntu\n#\nhostnamectl set-hostname s3\nPKG_INSTALL=\n#\nif which gpg; then\n  echo \"Package gnupg already installed\"\nelse\n  PKG_INSTALL=\"$PKG_INSTALL gnupg\"\nfi\n#\nif which curl; then\n  echo \"Package curl already installed\"\nelse\n  PKG_INSTALL=\"$PKG_INSTALL curl\"\nfi\n#\nif which bridge; then\n  echo \"Package iproute2 already installed\"\nelse\n  PKG_INSTALL=\"$PKG_INSTALL iproute2\"\nfi\n#\n# PKG_INSTALL always starts with a blank, so we can't just check if it's empty\n# The following hack turns a string that contains only whitespaces into\n# an empty string and removes leading whitespaces\n#\nPKG_INSTALL=`echo $PKG_INSTALL`\nif [ -n \"$PKG_INSTALL\" ]; then\n  echo \"Installing packages $PKG_INSTALL\"\n  if command -v apk >/dev/null; then\n    apk add --no-cache $PKG_INSTALL\n  elif command -v apt-get >/dev/null; then\n    apt-get update -qq && apt-get install -qq $PKG_INSTALL\n  else\n    echo \"Cannot install packages (no supported package manager found)\" >&2\n    exit 1\n  fi\nfi\n#\n# Install FRR on a Ubuntu VM if needed\n#\nif which /usr/lib/frr/frrinit.sh; then\n  echo \"FRR already installed, skipping installation\"\nelse\n  curl -s https://deb.frrouting.org/frr/keys.asc >/etc/apt/trusted.gpg.d/frr.asc\n  FRRVER=\"frr-stable\"\n  echo deb https://deb.frrouting.org/frr $(lsb_release -s -c) $FRRVER > /etc/apt/sources.list.d/frr.list\n  apt-get update -qq && apt-get install -qq frr frr-pythontools bridge-utils ethtool\nfi\n#\n# Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)\n#\n#\n# Enable FRR daemons\n#\n\n/usr/lib/frr/frrinit.sh restart\n\n# Set system defaults\n#\n# Send ARP requests from a sane source IP address\n#\nsysctl -w net.ipv4.conf.all.arp_announce=2\n\n#\n# Create loopbacks, stub and lag/bond devices\n#\nif [ ! -e /sys/class/net/lo ]; then\n  if [ ! -e /sys/devices/virtual/net/lo ]; then\n    ip link add lo type dummy\n    ip link set dev lo up\n  fi\nfi\n\n# Set Linux interface sysctl parameters: Disable IPv6 (for IPv4-only interfaces)\n# or SLAAC (if the device is a router)\n#\nip link set eth1 down\n# Linux interface parameters for eth1\n#\nsysctl -qw net/ipv6/conf/eth1/disable_ipv6=1\nip link set dev eth1 mtu 1500\nip link set eth1 up\n\nip link set eth2 down\n# Linux interface parameters for eth2\n#\nsysctl -qw net/ipv6/conf/eth2/disable_ipv6=1\nip link set dev eth2 mtu 1500\nip link set eth2 up\n\nip link set eth3 down\n# Linux interface parameters for eth3\n#\nsysctl -qw net/ipv6/conf/eth3/disable_ipv6=1\nip link set dev eth3 mtu 1500\nip link set eth3 up\n\n\n#\n# Add vtysh.conf file\necho \"service integrated-vtysh-config\" >/etc/frr/vtysh.conf\n\n#\n# Ensure FRR's log directory exists before enabling file logging\n#\nmkdir -p /var/log/frr && chown frr:frr /var/log/frr\n#\n# Rest of initial configuration done through VTYSH\n#\ncat >/tmp/config <<CONFIG\nhostname s3\n!\nlog file /var/log/frr/frr.log informational\n\n!\nip forwarding\nfrr defaults datacenter\n!\ninterface lo\n no shutdown\n ip address 10.0.0.3/32\n!\ninterface eth1\n no shutdown\n description s3 -> dut\n ! no ip address\n!\ninterface eth2\n no shutdown\n description [Access VLAN red] s3 -> r3\n ! no ip address\n!\ninterface eth3\n no shutdown\n description [Access VLAN vlan_1] s3 -> d3\n ! no ip address\n!\ninterface eth1.700\n no shutdown\n description [SubIf VLAN red] s3 -> dut\n ! no ip address\n!\ninterface vlan1\n no shutdown\n description VLAN vlan_1 (1) -> [d1,dut,d2,s2,d3...]\n ip address 172.31.1.3/24\n!\ninterface vlan700\n no shutdown\n description VLAN red (700) -> [r1,dut,r2,s2,r3...]\n ! no ip address\n!\ndo write\nCONFIG\nvtysh -f /tmp/config\n\n!\nexit 0\n"
}
ok: [s4] => {
    "msg": "initial configuration for s4\n=========================================\n#!/bin/bash\n#\nset -e\nset -x\n#\n# Create bash profile script\n#\ncat <<'SCRIPT' >/root/.bash_profile\n#!/bin/bash\n#\nexport PS1=\"\\h(bash)# \"\necho\necho \"Use vtysh to connect to FRR daemon\"\necho\nSCRIPT\n#\n# This is an artifact of unknown provenance that should be removed in a year or two (= 2026/2027)\n#\n# FRR controls these parameters with 'ip forwarding' and 'ipv6 forwarding' commands\n#\nsysctl -w net.ipv4.ip_forward=1\nsysctl -w net.ipv6.conf.all.forwarding=0\n#\ncat <<SCRIPT >.bash_profile\n#!/bin/bash\n#\nexport PS1=\"\\h(bash)$ \"\nexport PATH=$PATH:/usr/sbin\necho \necho \"Use sudo vtysh to connect to FRR daemon\"\necho\nSCRIPT\n#\n# Build hosts file\n#\n#\ncat <<'SCRIPT' >/tmp/hosts\n#\n# Created by netlab initial\n#\n172.31.1.9 d1 eth1.d1\n172.31.1.10 d2 eth1.d2\n172.31.1.11 d3 eth1.d3\n172.31.1.12 d4 eth1.d4\n10.0.0.1 dut\n172.31.1.1 vether1.dut\n172.31.1.5 r1 eth1.r1\n172.31.1.6 r2 eth1.r2\n172.31.1.7 r3 eth1.r3\n172.31.1.8 r4 eth1.r4\n10.0.0.2 s2\n172.31.1.2 vlan1.s2\n10.0.0.3 s3\n172.31.1.3 vlan1.s3\n10.0.0.4 s4\n172.31.1.4 vlan1.s4\nSCRIPT\ngrep \"Created by netlab\" /etc/hosts || uniq /tmp/hosts >>/etc/hosts\n#\n# Configure system defaults on Ubuntu\n#\nhostnamectl set-hostname s4\nPKG_INSTALL=\n#\nif which gpg; then\n  echo \"Package gnupg already installed\"\nelse\n  PKG_INSTALL=\"$PKG_INSTALL gnupg\"\nfi\n#\nif which curl; then\n  echo \"Package curl already installed\"\nelse\n  PKG_INSTALL=\"$PKG_INSTALL curl\"\nfi\n#\nif which bridge; then\n  echo \"Package iproute2 already installed\"\nelse\n  PKG_INSTALL=\"$PKG_INSTALL iproute2\"\nfi\n#\n# PKG_INSTALL always starts with a blank, so we can't just check if it's empty\n# The following hack turns a string that contains only whitespaces into\n# an empty string and removes leading whitespaces\n#\nPKG_INSTALL=`echo $PKG_INSTALL`\nif [ -n \"$PKG_INSTALL\" ]; then\n  echo \"Installing packages $PKG_INSTALL\"\n  if command -v apk >/dev/null; then\n    apk add --no-cache $PKG_INSTALL\n  elif command -v apt-get >/dev/null; then\n    apt-get update -qq && apt-get install -qq $PKG_INSTALL\n  else\n    echo \"Cannot install packages (no supported package manager found)\" >&2\n    exit 1\n  fi\nfi\n#\n# Install FRR on a Ubuntu VM if needed\n#\nif which /usr/lib/frr/frrinit.sh; then\n  echo \"FRR already installed, skipping installation\"\nelse\n  curl -s https://deb.frrouting.org/frr/keys.asc >/etc/apt/trusted.gpg.d/frr.asc\n  FRRVER=\"frr-stable\"\n  echo deb https://deb.frrouting.org/frr $(lsb_release -s -c) $FRRVER > /etc/apt/sources.list.d/frr.list\n  apt-get update -qq && apt-get install -qq frr frr-pythontools bridge-utils ethtool\nfi\n#\n# Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)\n#\n#\n# Enable FRR daemons\n#\n\n/usr/lib/frr/frrinit.sh restart\n\n# Set system defaults\n#\n# Send ARP requests from a sane source IP address\n#\nsysctl -w net.ipv4.conf.all.arp_announce=2\n\n#\n# Create loopbacks, stub and lag/bond devices\n#\nif [ ! -e /sys/class/net/lo ]; then\n  if [ ! -e /sys/devices/virtual/net/lo ]; then\n    ip link add lo type dummy\n    ip link set dev lo up\n  fi\nfi\n\n# Set Linux interface sysctl parameters: Disable IPv6 (for IPv4-only interfaces)\n# or SLAAC (if the device is a router)\n#\nip link set eth1 down\n# Linux interface parameters for eth1\n#\nsysctl -qw net/ipv6/conf/eth1/disable_ipv6=1\nip link set dev eth1 mtu 1500\nip link set eth1 up\n\nip link set eth2 down\n# Linux interface parameters for eth2\n#\nsysctl -qw net/ipv6/conf/eth2/disable_ipv6=1\nip link set dev eth2 mtu 1500\nip link set eth2 up\n\nip link set eth3 down\n# Linux interface parameters for eth3\n#\nsysctl -qw net/ipv6/conf/eth3/disable_ipv6=1\nip link set dev eth3 mtu 1500\nip link set eth3 up\n\n\n#\n# Add vtysh.conf file\necho \"service integrated-vtysh-config\" >/etc/frr/vtysh.conf\n\n#\n# Ensure FRR's log directory exists before enabling file logging\n#\nmkdir -p /var/log/frr && chown frr:frr /var/log/frr\n#\n# Rest of initial configuration done through VTYSH\n#\ncat >/tmp/config <<CONFIG\nhostname s4\n!\nlog file /var/log/frr/frr.log informational\n\n!\nip forwarding\nfrr defaults datacenter\n!\ninterface lo\n no shutdown\n ip address 10.0.0.4/32\n!\ninterface eth1\n no shutdown\n description s4 -> dut\n ! no ip address\n!\ninterface eth2\n no shutdown\n description [Access VLAN red] s4 -> r4\n ! no ip address\n!\ninterface eth3\n no shutdown\n description [Access VLAN vlan_1] s4 -> d4\n ! no ip address\n!\ninterface eth1.1\n no shutdown\n description [SubIf VLAN vlan_1] s4 -> dut\n ! no ip address\n!\ninterface vlan700\n no shutdown\n description VLAN red (700) -> [r1,dut,r2,s2,r3...]\n ! no ip address\n!\ninterface vlan1\n no shutdown\n description VLAN vlan_1 (1) -> [d1,dut,d2,s2,d3...]\n ip address 172.31.1.4/24\n!\ndo write\nCONFIG\nvtysh -f /tmp/config\n\n!\nexit 0\n"
}

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/openbsd.yml for dut
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for s2, s3, s4

TASK [template] ****************************************************************
changed: [dut]

TASK [Execute /tmp/config.sh to deploy initial config from /work/netlab_cicd/node_files/dut/initial] ***
changed: [dut]

TASK [template] ****************************************************************
changed: [s2]
changed: [s4]
changed: [s3]

TASK [set_fact] ****************************************************************
ok: [s2]
ok: [s3]
ok: [s4]

TASK [run /tmp/config.sh to deploy initial config from /work/netlab_cicd/node_files/s2/initial] ***
changed: [s2]
changed: [s4]
changed: [s3]

TASK [run vtysh to import initial config from /work/netlab_cicd/node_files/s2/initial] ***
skipping: [s2]
skipping: [s3]
skipping: [s4]

PLAY [Deploy module-specific configurations] ***********************************

TASK [Set variables that cannot be set with VARS] ******************************
ok: [dut]
ok: [s2]
ok: [s3]
ok: [s4]

TASK [Deploy individual configuration modules] *********************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut, s2, s3, s4 => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut, s2, s3, s4 => (item=routing)

TASK [Figure out whether to deploy the module vlan on current device] **********
ok: [dut]
ok: [s2]
ok: [s3]
ok: [s4]

TASK [Find configuration template for vlan] ************************************
ok: [dut]
ok: [s2]
ok: [s3]
ok: [s4]

TASK [fail] ********************************************************************
skipping: [dut]
skipping: [s2]
skipping: [s3]
skipping: [s4]

TASK [Find configuration deployment deploy_script for vlan] ********************
ok: [dut]
ok: [s2]
ok: [s3]
ok: [s4]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [dut] => {
    "msg": "vlan configuration for dut\n=========================================\n#!/bin/sh\n#\nset -e # Exit immediately when any command fails\nset -x # Track commands for troubleshooting\n#\n\nifconfig vio2 -inet\nifconfig vio2 -inet6\nifconfig vio2 mtu 1500\nifconfig vio2 description \"dut -> s3\"\nifconfig vio2 up\n\nifconfig bridge1 add vio2 up\nifconfig vio3 -inet\nifconfig vio3 -inet6\nifconfig vio3 mtu 1500\nifconfig vio3 description \"dut -> s4\"\nifconfig vio3 up\n\nifconfig bridge700 add vio3 up\nifconfig vio4 -inet\nifconfig vio4 -inet6\nifconfig vio4 mtu 1500\nifconfig vio4 description \"[Access VLAN red] dut -> r1\"\nifconfig vio4 up\n\nifconfig bridge700 add vio4 up\nifconfig vio5 -inet\nifconfig vio5 -inet6\nifconfig vio5 mtu 1500\nifconfig vio5 description \"[Access VLAN vlan_1] dut -> d1\"\nifconfig vio5 up\n\nifconfig bridge1 add vio5 up\nifconfig vlan7001 parent vio1 vnetid 700\nifconfig vlan7001 -inet\nifconfig vlan7001 -inet6\nifconfig vlan7001 description \"[SubIf VLAN red] dut -> s2\"\nifconfig vlan7001 up\n\nifconfig bridge700 add vlan7001 up\nifconfig vlan11 parent vio1 vnetid 1\nifconfig vlan11 -inet\nifconfig vlan11 -inet6\nifconfig vlan11 description \"[SubIf VLAN vlan_1] dut -> s2\"\nifconfig vlan11 up\n\nifconfig bridge1 add vlan11 up\nifconfig vlan7002 parent vio2 vnetid 700\nifconfig vlan7002 -inet\nifconfig vlan7002 -inet6\nifconfig vlan7002 description \"[SubIf VLAN red] dut -> s3\"\nifconfig vlan7002 up\n\nifconfig bridge700 add vlan7002 up\nifconfig vlan13 parent vio3 vnetid 1\nifconfig vlan13 -inet\nifconfig vlan13 -inet6\nifconfig vlan13 description \"[SubIf VLAN vlan_1] dut -> s4\"\nifconfig vlan13 up\n\nifconfig bridge1 add vlan13 up\nifconfig vether1 -inet\nifconfig vether1 -inet6\nifconfig vether1 inet 172.31.1.1/24 \nifconfig vether1 mtu 1500\nifconfig vether1 description \"VLAN vlan_1 (1) -> [d1,d2,s2,d3,s3...]\"\nifconfig vether1 up\n\nifconfig bridge1 add vether1 up\nifconfig vether700 -inet\nifconfig vether700 -inet6\nifconfig vether700 description \"VLAN red (700) -> [r1,r2,s2,r3,s3...]\"\nifconfig vether700 up\n\nifconfig bridge700 add vether700 up\n\n#\n# (re-)start RA daemon\n#\npkill -q rad || true\nrad\n"
}
ok: [s2] => {
    "msg": "vlan configuration for s2\n=========================================\n#!/bin/bash\n#\nset -e # Exit immediately when any command fails\nset -x # Track commands for troubleshooting\n#\nif [ ! -e /sys/devices/virtual/net/eth1.700 ]; then\n  ip link add link eth1 name eth1.700 type vlan id 700\n  ip link set dev eth1.700 up\nfi\nif [ ! -e /sys/devices/virtual/net/eth1.1 ]; then\n  ip link add link eth1 name eth1.1 type vlan id 1\n  ip link set dev eth1.1 up\nfi\nif [ ! -e /sys/devices/virtual/net/vlan700 ]; then\n  ip link add vlan700 type bridge\n  ip link set dev vlan700 address ca:f4:00:02:00:00\n  ip addr flush dev vlan700\n  # Linux interface parameters for vlan700\n  #\n  sysctl -qw net/ipv6/conf/vlan700/disable_ipv6=1\n\nfi\nif [ ! -e /sys/devices/virtual/net/vlan1 ]; then\n  ip link add vlan1 type bridge\n  ip link set dev vlan1 address ca:f4:00:02:00:01\n  ip addr flush dev vlan1\n  # Linux interface parameters for vlan1\n  #\n  sysctl -qw net/ipv6/conf/vlan1/disable_ipv6=1\n  ip link set dev vlan1 mtu 1500\n\nfi\n\nip link set dev eth2 master vlan700\nip link set dev eth3 master vlan1\nip link set dev eth1.700 master vlan700\nip link set dev eth1.1 master vlan1\n\nip link set dev vlan700 up\nip link set dev vlan1 up\n"
}
ok: [s3] => {
    "msg": "vlan configuration for s3\n=========================================\n#!/bin/bash\n#\nset -e # Exit immediately when any command fails\nset -x # Track commands for troubleshooting\n#\nif [ ! -e /sys/devices/virtual/net/eth1.700 ]; then\n  ip link add link eth1 name eth1.700 type vlan id 700\n  ip link set dev eth1.700 up\nfi\nif [ ! -e /sys/devices/virtual/net/vlan1 ]; then\n  ip link add vlan1 type bridge\n  ip link set dev vlan1 address ca:f4:00:03:00:00\n  ip addr flush dev vlan1\n  # Linux interface parameters for vlan1\n  #\n  sysctl -qw net/ipv6/conf/vlan1/disable_ipv6=1\n  ip link set dev vlan1 mtu 1500\n\nfi\nif [ ! -e /sys/devices/virtual/net/vlan700 ]; then\n  ip link add vlan700 type bridge\n  ip link set dev vlan700 address ca:f4:00:03:00:01\n  ip addr flush dev vlan700\n  # Linux interface parameters for vlan700\n  #\n  sysctl -qw net/ipv6/conf/vlan700/disable_ipv6=1\n\nfi\n\nip link set dev eth1 master vlan1\nip link set dev eth2 master vlan700\nip link set dev eth3 master vlan1\nip link set dev eth1.700 master vlan700\n\nip link set dev vlan1 up\nip link set dev vlan700 up\n"
}
ok: [s4] => {
    "msg": "vlan configuration for s4\n=========================================\n#!/bin/bash\n#\nset -e # Exit immediately when any command fails\nset -x # Track commands for troubleshooting\n#\nif [ ! -e /sys/devices/virtual/net/eth1.1 ]; then\n  ip link add link eth1 name eth1.1 type vlan id 1\n  ip link set dev eth1.1 up\nfi\nif [ ! -e /sys/devices/virtual/net/vlan700 ]; then\n  ip link add vlan700 type bridge\n  ip link set dev vlan700 address ca:f4:00:04:00:00\n  ip addr flush dev vlan700\n  # Linux interface parameters for vlan700\n  #\n  sysctl -qw net/ipv6/conf/vlan700/disable_ipv6=1\n\nfi\nif [ ! -e /sys/devices/virtual/net/vlan1 ]; then\n  ip link add vlan1 type bridge\n  ip link set dev vlan1 address ca:f4:00:04:00:01\n  ip addr flush dev vlan1\n  # Linux interface parameters for vlan1\n  #\n  sysctl -qw net/ipv6/conf/vlan1/disable_ipv6=1\n  ip link set dev vlan1 mtu 1500\n\nfi\n\nip link set dev eth1 master vlan700\nip link set dev eth2 master vlan700\nip link set dev eth3 master vlan1\nip link set dev eth1.1 master vlan1\n\nip link set dev vlan700 up\nip link set dev vlan1 up\n"
}

TASK [Deploy vlan configuration] ***********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/openbsd.yml for dut
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for s2, s3, s4

TASK [template] ****************************************************************
changed: [dut]

TASK [Execute /tmp/config.sh to deploy vlan config from /work/netlab_cicd/node_files/dut/vlan] ***
changed: [dut]

TASK [template] ****************************************************************
changed: [s3]
changed: [s2]
changed: [s4]

TASK [set_fact] ****************************************************************
ok: [s2]
ok: [s3]
ok: [s4]

TASK [run /tmp/config.sh to deploy vlan config from /work/netlab_cicd/node_files/s2/vlan] ***
changed: [s3]
changed: [s4]
changed: [s2]

TASK [run vtysh to import vlan config from /work/netlab_cicd/node_files/s2/vlan] ***
skipping: [s2]
skipping: [s3]
skipping: [s4]

TASK [Figure out whether to deploy the module routing on current device] *******
ok: [dut]
ok: [s2]
ok: [s3]
ok: [s4]

TASK [Find configuration template for routing] *********************************
skipping: [dut]
skipping: [s2]
skipping: [s3]
skipping: [s4]

TASK [fail] ********************************************************************
skipping: [dut]
skipping: [s2]
skipping: [s3]
skipping: [s4]

TASK [Find configuration deployment deploy_script for routing] *****************
skipping: [dut]
skipping: [s2]
skipping: [s3]
skipping: [s4]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [dut]
skipping: [s2]
skipping: [s3]
skipping: [s4]

TASK [Deploy routing configuration] ********************************************
skipping: [dut]
skipping: [s2]
skipping: [s3]
skipping: [s4]

PLAY [Deploy custom deployment templates] **************************************
skipping: no hosts matched

PLAY RECAP *********************************************************************
dut                        : ok=20   changed=4    unreachable=0    failed=0    skipped=7    rescued=0    ignored=0   
s2                         : ok=22   changed=4    unreachable=0    failed=0    skipped=9    rescued=0    ignored=0   
s3                         : ok=22   changed=4    unreachable=0    failed=0    skipped=9    rescued=0    ignored=0   
s4                         : ok=22   changed=4    unreachable=0    failed=0    skipped=9    rescued=0    ignored=0   

Results of configuration script deployments
================================================================================
r1               Script:  initial,routing
r2               Script:  initial,routing
r3               Script:  initial,routing
r4               Script:  initial,routing
d1               Script:  initial,routing
d2               Script:  initial,routing
d3               Script:  initial,routing
d4               Script:  initial,routing


The topology tests whether the device deals correctly with VLAN 1
in a vlan.trunk:

* As a native VLAN
* As a regular (tagged) VLAN
* In a trunk where another VLAN is a native VLAN

All r* hosts should be able to ping each other and all d* hosts should
be able to ping each other.

Please note it might take a while for the lab to work due to
STP learning phase