20:45:46 INFO Containerlab started version=0.70.2
20:45:46 INFO Parsing & checking topology file=clab.yml
20:45:46 INFO Removing directory path=/work/netlab_cicd/clab-ml_17
20:45:46 INFO Creating docker network name=nl_mgmt_17 IPv4 subnet=192.168.17.0/24 IPv6 subnet="" MTU=0
20:45:46 INFO Creating lab directory path=/work/netlab_cicd/clab-ml_17
20:45:46 INFO Creating container name=ce2
20:45:46 INFO Creating container name=p2
20:45:46 INFO Creating container name=p1
20:45:46 INFO Creating container name=ce1
20:45:46 INFO Creating container name=pe2
20:45:46 INFO Creating container name=dut
20:45:47 INFO Created link: ce2:eth1 ▪┄┄▪ pe2:eth2
20:45:47 INFO Created link: dut:et1 ▪┄┄▪ p1:eth1
20:45:47 INFO Running postdeploy actions for Arista cEOS 'dut' node
20:45:47 INFO Created link: p1:eth2 ▪┄┄▪ p2:eth1
20:45:47 INFO Created link: pe2:eth1 ▪┄┄▪ p2:eth2
20:45:48 INFO Created link: ce1:eth1 ▪┄┄▪ dut:et2
20:46:02 INFO Adding host entries path=/etc/hosts
20:46:02 INFO Adding SSH config for nodes path=/etc/ssh/ssh_config.d/clab-ml_17.conf
🎉 A newer containerlab version (0.71.1) is available!
Release notes: https://containerlab.dev/rn/0.71/#0711
Run 'sudo clab version upgrade' or see https://containerlab.dev/install/ for installation options.
[1m╭[0m[1m────────────────[0m[1m┬[0m[1m──────────────────────────────[0m[1m┬[0m[1m─────────[0m[1m┬[0m[1m────────────────[0m[1m╮[0m
[1m│[0m[1m      Name      [0m[1m│[0m[1m          Kind/Image          [0m[1m│[0m[1m  State  [0m[1m│[0m[1m IPv4/6 Address [0m[1m│[0m
[1m├[0m[1m────────────────[0m[1m┼[0m[1m──────────────────────────────[0m[1m┼[0m[1m─────────[0m[1m┼[0m[1m────────────────[0m[1m┤[0m
│ clab-ml_17-ce1 │ linux                        │ running │ 192.168.17.101 │
│                │ quay.io/frrouting/frr:10.4.1 │         │ N/A            │
├────────────────┼──────────────────────────────┼─────────┼────────────────┤
│ clab-ml_17-ce2 │ linux                        │ running │ 192.168.17.102 │
│                │ quay.io/frrouting/frr:10.4.1 │         │ N/A            │
├────────────────┼──────────────────────────────┼─────────┼────────────────┤
│ clab-ml_17-dut │ ceos                         │ running │ 192.168.17.103 │
│                │ ceos:4.34.2F                 │         │ N/A            │
├────────────────┼──────────────────────────────┼─────────┼────────────────┤
│ clab-ml_17-p1  │ linux                        │ running │ 192.168.17.105 │
│                │ quay.io/frrouting/frr:10.4.1 │         │ N/A            │
├────────────────┼──────────────────────────────┼─────────┼────────────────┤
│ clab-ml_17-p2  │ linux                        │ running │ 192.168.17.106 │
│                │ quay.io/frrouting/frr:10.4.1 │         │ N/A            │
├────────────────┼──────────────────────────────┼─────────┼────────────────┤
│ clab-ml_17-pe2 │ linux                        │ running │ 192.168.17.104 │
│                │ quay.io/frrouting/frr:10.4.1 │         │ N/A            │
╰────────────────┴──────────────────────────────┴─────────┴────────────────╯
Using transformed lab topology from snapshot file netlab.snapshot.pickle
Checking virtualization provider installation
OK: clab installed and working correctly
Starting clab nodes
Loading Linux kernel modules mpls-router,mpls-iptunnel required by containers using mpls module
provider clab: executing sudo -E containerlab deploy --reconfigure -t clab.yml

Initial configuration skipped, run 'netlab initial' to configure the devices